Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Column
width75%

 Follow these instructions if you have an in-house installation of

Frevvoproduct
up and running.  If you have a provisioned cloud tenant and you want to configure the LDAP Security Manager, follow the instructions for Configuring the LDAP Security Manager LDAP(s) for Cloud tenants.

Info

Safari browsers later than v5.1.7 running on Windows is no longer supported. Issues were found when using Safari with LDAP - SSO.

Column
width25%

On This Page:

Table of Contents
maxLevel2

...

These instructions assume that you have an in-house installation of Live Forms up and running. Refer to Configuring the LDAP Security Manager LDAP(s) for Cloud tenants if you have signed up for an LDAP tenant on the cloud server.

...

    1. Login to 
      Frevvoproduct
      as an  administrator (user:admin and password:admin if you have not changed it)
    2. Click on Manage and then Manage Tenants
    3. You will see a page where the current tenants are listed. If this is a new installation you will only see the default tenant d
    4. Click on the plus icon to add a new tenant.
    5. Configure the new tenant - Choose LDAP Security Manager.from the Security Manager Class drop down.
Section
Column
width25%
Panel
titleAdd New Tenant Screen


Image RemovedAdd New TenantImage Added

Column
width25%
Panel
titleEdit Existing Tenant Screen

Image RemovedImage Added

      1. Enter your LDAP Configuration Properties and Sample Configurations. Alternatively, you can start off from one of the sample configurations and provide only the key information listed above. See below for information on the TLS checkbox.

        Note

        The Name/value table highlighted in the image allows you to configure up to 10 additional LDAP properties. See this Oracle website for a complete list of all available LDAP properties. For example, you can configure

        Frevvoproduct
        to ignore or follow referrals.

        Setting the java.naming.referral property to a value of "ignore" in the Name/Value table configures

        Frevvoproduct
        to ignore referrals. Consult your LDAP Administrator for the details.

      2. If you are creating a new tenant:
        1. Enter a tenant id, a tenant name and description.
        2. The Max Concurrent Users is the maximum allowed by your license or less.
        3. Specify the LDAP User ID, password and email address of a user that will have the tenant admin permission.  
        4. Click Submit. You will see your new tenant in the tenant list if the connection to your LDAP server is successful.

 

WarningThe Ignore Case and
        1. This user id is the built-in admin and can be used to access tenant administrative functions if you cannot log in as an authenticated LDAP tenant admin.
          1. The tenant admin id, password and email fields are required. The Change password on next login is optional. It is checked by default.
        2. Click Submit. You will see your new tenant in the tenant list if the connection to your LDAP server is successful.


Warning

The Ignore Case and Notify checkboxes are checked by default. It is recommended that you leave them checked. Refer to Mixed or Upper case User Names topic for an explanation of the Ignore Case option.

The Notify checkbox determines whether the task notification emails setup in

Frevvoproduct
flows are sent or not.

 
Clicking the submit button tests the connection. Any errors are displayed at the top of the form. Here is an example of an error when there is a typo in the LDAP server name:


Here is another example if the connection password is not correct

...


Refer to FAQ - Live Forms and LDAP for more troubleshooting information.

LDAP Backdoor Admin

 A Tenant admin can login directly to Live Forms or login with a user id who has been given tenant admin permissions in your Active Directory.

When you create/ a new tenant you are prompted to set up a tenant admin user id, password and email address. This tenant admin does not authenticate via your LDAP IDP. It only exists in Live Forms. If you experience an issue with your LDAP configuration such that you can't login as an Active Directory authenticated user, this account provides a backdoor you can use to login to your tenant as a tenant admin in order to fix your configuration issue. Only one backdoor tenant admin account is supported. The Backdoor Admin is able to access the

Frevvoproduct
tenant admin functions if your LDAP Server should become inaccessible.

Image Removed

Browse this URL to login as the Backdoor Admin: <base_URL>/frevvo/web/admin/login The base URL is an Application Property. When specified,

Frevvoproduct
will prepend the base URL to the URLs in your Form/Document Actions. The <base_URL> is typically http(s)://<your servername>:<port>.

  • You must use the admin specific URL - <base-url>/frevvo/web/admin/login - to login as the backdoor admin.
  • Non admin users can also login using the admin specific URL.

If your tenant originally used the Default Security Manager and then you changed to the LDAP Security Manager, this tenant admin account has already been setup. If you have forgotten the password, you can change it by :

...

Tip

The frevvo superuser admin (Cloud customers) and the in-house superuser can change the password for the Backdoor Admin userid from the Edit Tenant page.

What if you do not remember the userid of your original tenant admin? Follow these steps:

...

Tip

The frevvo (Cloud customers) and in-house superuser can see the Backdoor aAmin tenant userid from the Edit Tenant page.

 

Check if the configuration is correct

Here are some quick tests to check if the LDAP configuration is correct:

  1. Login as the 
    Frevvoproduct
    tenant admin for the LDAP tenant.
  2. Click on the Manage Users link.
  3. Click All. You should see a list of LDAP users which were assigned one of these
    Frevvoproduct
    roles on the LDAP server: frevvo.TenantAdmin, frevvo.Designer, frevvo.Publisher, frevvo.ReadOnly
  4. Now, click Back To Manage Tenant.
  5. Click Manage Roles. You should see a list of groups from your LDAP server.
  6. Log out from 
    Frevvoproduct
     (you should be currently logged in as the tenantadmin)
  7. Try to login with the user name and password of a user in LDAP. You need to specify the proper tenant when logging in. For instance, if john is a valid LDAP user and the name of the LDAP tenant is MYLDAP, you should log in as john@MYLDAP. The password would be john's password in LDAP.

Since you are using LDAP to define

Frevvoproduct
users and roles (i.e., groups), you do not see an Add User icon or Add Role icon on the Manage Users or Manage Roles pages.

Secure LDAP Configuration

Frevvoproduct
will be connecting to your LDAP server over the network. Here are two methods to secure the LDAP connection:

  1. Simple authentication over SSL - To enable SSL use the ldaps scheme in your LDAP tenant configuration in place of ldap and use port 636.  This is supported by older LDAP products such as AD 2000. It is important that the hostname in the certificate matches the hostname in your ldaps url.
  2. Simple or external SASL authentication over TLS (Transport Layer Security) - To enable this method check the TLS checkbox in your LDAP tenant configuration. TLS is used by the LDAP v3 standard in products such as AD 2003 and above. TLS uses the standard LDAP port 389.  

When using either of these two methods, the recommended approach is to use a CA signed certificate. If you do not have a CA signed certificate then you can use a self-signed certificate.

Note

Self signed certificates are not supported for Live Forms Online. Although they are supported for

Frevvoproduct
in-house, use of self-signed certificates is not recommended.

Finally you need to install your signed or self-signed certificate. You can import the certificate into a keystore that 

Frevvoproduct
 can access and trust. Follow the instructions for your keystore. If 
Frevvoproduct
 is installed in a tomcat server, the tomcat keystore can be used. Refer to this Apache Tomcat website for instructions.

LDAP Configuration Properties and Sample Configurations

These are the properties used to configure the LDAP/Active Directory security manager. The properties in bold are required.

Property DescriptionActive Directory Sample ConfigurationOpenLDAP Sample Configuration
Connection URLldap server url

In-house

ldap://[your server]:[port, typically the default is 389 ]

Cloud - SSL installed on your LDAP server

ldaps://[your server]:[port, typically the default is 636]

In-house

ldap://[your server]:[port, typically the default is 389]

Cloud -SSL installed on your LDAP server

ldaps://[your server]:[port, typically the default is 636]

Connection User

User to connect to LDAP.

This user must have the proper permissions to read and run queries in the ldap server.

If using Active Directory, it is common to specify the domain.

Ex: an entry of TEST\Administrator refers to the user Administrator in the TEST domain.

[user name]
cn=admin,dc=test,dc=frevvo,dc=com
Connection PasswordPassword for the Connection user.[user password][user password]
Users Base

Searches for users will start from the ldap node specified by this property.I

f the value is empty the searches will start from the root domain.

CN=Users,DC=test,DC=windows,DC=frevvo,DC=comDC=test,DC=frevvo,DC=com
Groups Base

Searches for the groups will start from the ldap node specified by this property.

If the value is empty, searches will start from the root domain

CN=Users,DC=test,DC=windows,DC=frevvo,DC=comDC=test,DC=frevvo,DC=com
UserId Display

User attribute that will be visible in frevvo.

This is what will be displayed in the list of users a tenant admin sees and has to be unique in the server.

Another restriction is that the values for the attribute configured here cannot have spaces.

For instance, don't configure CN as the value since it can contain spaces in most systems.

sAMAccountNameuid
GroupId Display

Group attribute that will be visible in frevvo.

This is, for instance, what will be displayed in the list of groups a tenant admin sees or the groups used in workflows.

This attribute has to be unique in the server.

sAMAccountNameentryDN
Notify checkboxNotifications are emails sent by frevvo to workflows participants. If checked, notifications will be sent.Check the Notifications checkboxCheck the Notifications checkbox
All Groups Filter

The expected value is an LDAP filter expression.

The expression should return the groups that will have access to frevvo forms and workflows.

(objectClass=group)( | (objectClass=groupOfUniqueNames)(objectClass=organizationalRole))
All Users Filter

The expected value is an LDAP filter expression.

The expression should return the users that will have access to frevvo forms and work flows.

(objectClass=user)(objectClass=person)
User Member OfAttribute on a user object storing the groups the user is a member of. memberOf" "
Group MemberAttribute on a group object storing the users that are a member of this group.memberuniqueMember
First Name

Name of the user ''first name'' attribute

givenNamecn
Last NameName of the user ''last name'' attribute.snsn
Email

Name of the user ''email'' attribute in the LDAP server.

This value can be used in a rule is used in email notifications

mailmail
Manager

Attribute on a user object storing the DN of the user’s manager. This value can be retrieved in a rule.

It can also be used in flow navigation using the subject.reports.to data available in

Frevvoproduct
.

managermanager
Ignore Case checkbox

If checked, 

Frevvoproduct
ignores the case stored in LDAP systems.

This is primarily for the purpose of determining roles.

Check the Ignore Case checkboxCheck the Ignore Case checkbox
CustomThis is a a comma separated list of attribute names to be retrieved from the LDAP Server.Ex: carLicense,employeeNumberEx: carLicense,employeeNumber
TLS

This enables simple authentication over TLS. If checked, a trusted certificate for the LDAP server is required.

Refer to the secure the connection topic for details.

Check if you are using TLS to secure the connection.  Check if you are using TLS to secure the connection

Options for Authentication

Once you have your tenant successfully connecting with your LDAP server, there are two options available regarding the authentication process.

Option 1 - Live Forms login page authenticating against LDAP

...

Frevvoproduct

...

Frevvoproduct

...

The password provided in the login page is the user's password in LDAP. A very important point to note is that the user name, "john" in the example above, needs to match the value for the LDAP entry attribute configured in the property UserID Display field on the  Edit Tenant screen. For instance, for Active Directory, the value of this property is normally sAMAccountName. That means 

Frevvoproduct
 will try to find an entry in LDAP that has sAMAccountName=john.

Option 2 - Single Sign On with IIS

In this scenario, a user authenticates to his windows account and tries to use 

Frevvoproduct
. Since the user is already authenticated to the network, 
Frevvoproduct
 will recognize his credentials and automatically forward the user to his 
Frevvoproduct
 account, if he is a designer, or allow the user to use a form/flow if those resources are available to the tenant.

The basic deployment is IIS fronting 

Frevvoproduct
 and the authentication is done against LDAP.  For that to work you need to:

  1. Install Live Forms 
  2. Configure Live Forms to work with IIS
  3. Configure Windows Authentication 
    1. Configure Windows Authentication on IIS7
    2. Configure Windows Authentication on IIS6
  4. In IIS, Make sure that Anonymous Authentication or Basic Authentication is NOT configured in the Web Application (Default Web) that will be used to proxy requests to 
    Frevvoproduct

Please also refer to the force auth property for forms and flows. Force auth lets you override SSO for an individual form or flow.

Info

If you are using LDAP and SSO, and you want to embed the

Frevvoproduct
in your website, refer to Embedding the Task List for important information.

Once all is configured and running it is possible to test these scenarios:

Signing in from within the network

In this case, the 

Frevvoproduct
 server and the Active Directory server are running on the same machine. The user is already authenticated to the windows network and points the browser to:

Code Block
languagehtml/xml
http://[server]/frevvo/web/tn/[LDAP tenant]/login

Substitute LDAP tenant above with the tenant name you configured with the LDAP Security Manager. The server variable should be the ip address of the machine where IIS is installed .

The user will automatically authenticate to 

Frevvoproduct
. It is crucial that the LDAP user is known to 
Frevvoproduct
, in other words, the user should be one of the entries retrieved by the LDAP expression configured in the All Users Filter on the LDAP configuration screen.

Signing in from outside the network

In this case, the 

Frevvoproduct
 server and the Active Directory server are running on different machines. The user is trying to hit the URL below from outside the network. 

Code Block
languagehtml/xml
 http://[server]/frevvo/web/tn/[LDAP tenant]/login 

Substitute LDAP tenant above with the tenant name you configured with the LDAP Security Manager and the server variable with the ip address of the machine where IIS is installed.

Since the user is not authenticated in the windows Network, he will be prompted by the browser for credentials. IIS will authenticate the user in the network and forward the request to 

Frevvoproduct
. The user will be automatically redirected to his initial page without having to re-enter his credentials.

Single sign-on Browser Configuration

If you are still being prompted for Windows authentication after SSO is configured, the security settings for your browser may be too high. Configure your browser to authenticate using the "system logon credentials" (Kerberos authentication mechanism) by adding the frevvo server to the browser's trusted sites.

Follow these steps for the specified browsers:

Configuring Internet Explorer

...

Check if the configuration is correct

Here are some quick tests to check if the LDAP configuration is correct:

  1. Login as the 
    Frevvoproduct
    tenant admin for the LDAP tenant.
  2. Click on the Manage Users link.
  3. Click All. You should see a list of LDAP users which were assigned one of these
    Frevvoproduct
    roles on the LDAP server: frevvo.TenantAdmin, frevvo.Designer, frevvo.Publisher, frevvo.ReadOnly
  4. Now, click Back To Manage Tenant.
  5. Click Manage Roles. You should see a list of groups from your LDAP server.
  6. Log out from 
    Frevvoproduct
     (you should be currently logged in as the tenantadmin)
  7. Try to login with the user name and password of a user in LDAP. You need to specify the proper tenant when logging in. For instance, if john is a valid LDAP user and the name of the LDAP tenant is MYLDAP, you should log in as john@MYLDAP. The password would be john's password in LDAP.

Since you are using LDAP to define

Frevvoproduct
users and roles (i.e., groups), you do not see an Add User icon or Add Role icon on the Manage Users or Manage Roles pages.

LDAP Built-in admin

 A Tenant admin can login directly to Live Forms or login with a user id who has been given tenant admin permissions in your Active Directory.

When you create a new tenant you are prompted to set up a tenant admin user id, password and email address. This tenant admin does not authenticate via your LDAP IDP. It only exists in Live Forms. If you experience an issue with your LDAP configuration such that you can't login as an Active Directory authenticated user, use this account to login to your tenant as a tenant admin in order to fix your configuration issue. The built-in admin is able to access the

Frevvoproduct
tenant admin functions if your LDAP Server should become inaccessible. Only one built-in tenant admin account is supported.

Image Added

Browse this URL to login as the built-in admin: <base_URL>/frevvo/web/admin/login. When specified,

Frevvoproduct
will prepend the base URL to the URLs in your Form/Document Actions. The <base_URL> is typically http(s)://<your servername>:<port>.

  • You must use the admin specific URL - <base-url>/frevvo/web/admin/login - to login as the built-in admin.
  • Non admin users can also login using the admin specific URL.

If your tenant originally used the Default Security Manager and then you changed to the LDAP Security Manager, this tenant admin account has already been setup. If you have forgotten the password, you can change it by :

  • Login as your authenticated LDAP tenant admin. Click the Edit Tenant link. The Admin User information is displayed .
     
  • If logging in as the authenticated LDAP tenant admin is not possible, browse this admin specific URL - <base-url>/frevvo/web/admin/login. Enter the built-in admin userid. Click Forgot Password? Once you have changed the password, browse the admin specific URL again and login with the tenant admin user id and the new password. If you need to change the password again, or make changes to your tenant, click the Edit Tenant link. The built-in admin password can be changed on this screen.

    Image Added

    This error message displays if any other user clicks on the Forgot Password? link after browsing the admin specific URL:

    Image Added
     

What if you do not remember the userid of your original tenant admin? Follow these steps:

  1. Login as your authenticated LDAP tenant admin. Click the Edit Tenant link. The Admin User information is displayed .
  2. If logging in as the authenticated LDAP tenant admin is not possible, the frevvo (Cloud customers) and in-house superuser can see the built-in admin tenant userid from the Edit Tenant page.

    Image Added

Secure LDAP Configuration

Frevvoproduct
will be connecting to your LDAP server over the network. Here are two methods to secure the LDAP connection:

  1. Simple authentication over SSL - To enable SSL use the ldaps scheme in your LDAP tenant configuration in place of ldap and use port 636.  This is supported by older LDAP products such as AD 2000. It is important that the hostname in the certificate matches the hostname in your ldaps url.
  2. Simple or external SASL authentication over TLS (Transport Layer Security) - To enable this method check the TLS checkbox in your LDAP tenant configuration. TLS is used by the LDAP v3 standard in products such as AD 2003 and above. TLS uses the standard LDAP port 389.  

When using either of these two methods, the recommended approach is to use a CA signed certificate. If you do not have a CA signed certificate then you can use a self-signed certificate.

Note

Self signed certificates are not supported for Live Forms Online. Although they are supported for

Frevvoproduct
in-house, use of self-signed certificates is not recommended.

Finally you need to install your signed or self-signed certificate. You can import the certificate into a keystore that 

Frevvoproduct
 can access and trust. Follow the instructions for your keystore. If 
Frevvoproduct
 is installed in a tomcat server, the tomcat keystore can be used. Refer to this Apache Tomcat website for instructions.

LDAP Configuration Properties and Sample Configurations

These are the properties used to configure the LDAP/Active Directory security manager. The properties in bold are required.

Property DescriptionActive Directory Sample ConfigurationOpenLDAP Sample Configuration
Connection URLldap server url

In-house

ldap://[your server]:[port, typically the default is 389 ]

Cloud - SSL installed on your LDAP server

ldaps://[your server]:[port, typically the default is 636]

In-house

ldap://[your server]:[port, typically the default is 389]

Cloud -SSL installed on your LDAP server

ldaps://[your server]:[port, typically the default is 636]

Connection User

User to connect to LDAP.

This user must have the proper permissions to read and run queries in the ldap server.

If using Active Directory, it is common to specify the domain.

Ex: an entry of TEST\Administrator refers to the user Administrator in the TEST domain.

[user name]
cn=admin,dc=test,dc=frevvo,dc=com
Connection PasswordPassword for the Connection user.[user password][user password]
Users Base

Searches for users will start from the ldap node specified by this property.I

f the value is empty the searches will start from the root domain.

CN=Users,DC=test,DC=windows,DC=frevvo,DC=comDC=test,DC=frevvo,DC=com
Groups Base

Searches for the groups will start from the ldap node specified by this property.

If the value is empty, searches will start from the root domain

CN=Users,DC=test,DC=windows,DC=frevvo,DC=comDC=test,DC=frevvo,DC=com
UserId Display

User attribute that will be visible in frevvo.

This is what will be displayed in the list of users a tenant admin sees and has to be unique in the server.

Another restriction is that the values for the attribute configured here cannot have spaces.

For instance, don't configure CN as the value since it can contain spaces in most systems.

sAMAccountNameuid
GroupId Display

Group attribute that will be visible in frevvo.

This is, for instance, what will be displayed in the list of groups a tenant admin sees or the groups used in workflows.

This attribute has to be unique in the server.

sAMAccountNameentryDN
Notify checkboxNotifications are emails sent by frevvo to workflows participants. If checked, notifications will be sent.Check the Notifications checkboxCheck the Notifications checkbox
All Groups Filter

The expected value is an LDAP filter expression.

The expression should return the groups that will have access to frevvo forms and workflows.

(objectClass=group)( | (objectClass=groupOfUniqueNames)(objectClass=organizationalRole))
All Users Filter

The expected value is an LDAP filter expression.

The expression should return the users that will have access to frevvo forms and work flows.

(objectClass=user)(objectClass=person)
User Member OfAttribute on a user object storing the groups the user is a member of. memberOf" "
Group MemberAttribute on a group object storing the users that are a member of this group.memberuniqueMember
First Name

Name of the user ''first name'' attribute

givenNamecn
Last NameName of the user ''last name'' attribute.snsn
Email

Name of the user ''email'' attribute in the LDAP server.

This value can be used in a rule is used in email notifications

mailmail
Manager

Attribute on a user object storing the DN of the user’s manager. This value can be retrieved in a rule.

It can also be used in flow navigation using the subject.reports.to data available in

Frevvoproduct
.

managermanager
Ignore Case checkbox

If checked, 

Frevvoproduct
ignores the case stored in LDAP systems.

This is primarily for the purpose of determining roles.

Check the Ignore Case checkboxCheck the Ignore Case checkbox
CustomThis is a a comma separated list of attribute names to be retrieved from the LDAP Server.Ex: carLicense,employeeNumberEx: carLicense,employeeNumber
TLS

This enables simple authentication over TLS. If checked, a trusted certificate for the LDAP server is required.

Refer to the secure the connection topic for details.

Check if you are using TLS to secure the connection.  Check if you are using TLS to secure the connection

Options for Authentication

Once you have your tenant successfully connecting with your LDAP server, there are two options available regarding the authentication process.

Option 1 - Live Forms login page authenticating against LDAP

This is the case where the user will authenticate through the 

Frevvoproduct
's login page but delegate authentication to LDAP. Lets assume that your tenant named 'LDAP' was successfully configured to connect to your LDAP server and there is a user 'john' in your LDAP server. You can now login directly via
Frevvoproduct
's login page:

Image Added 

The password provided in the login page is the user's password in LDAP. A very important point to note is that the user name, "john" in the example above, needs to match the value for the LDAP entry attribute configured in the property UserID Display field on the  Edit Tenant screen. For instance, for Active Directory, the value of this property is normally sAMAccountName. That means 

Frevvoproduct
 will try to find an entry in LDAP that has sAMAccountName=john.

Option 2 - Single Sign On with IIS

In this scenario, a user authenticates to his windows account and tries to use 

Frevvoproduct
. Since the user is already authenticated to the network, 
Frevvoproduct
 will recognize his credentials and automatically forward the user to his 
Frevvoproduct
 account, if he is a designer, or allow the user to use a form/flow if those resources are available to the tenant.

The basic deployment is IIS fronting 

Frevvoproduct
 and the authentication is done against LDAP.  For that to work you need to:

  1. Install Live Forms 
  2. Configure Live Forms to work with IIS
  3. Configure Windows Authentication 
    1. Configure Windows Authentication on IIS7
    2. Configure Windows Authentication on IIS6
  4. In IIS, Make sure that Anonymous Authentication or Basic Authentication is NOT configured in the Web Application (Default Web) that will be used to proxy requests to 
    Frevvoproduct

Please also refer to the force auth property for forms and flows. Force auth lets you override SSO for an individual form or flow.

Info

If you are using LDAP and SSO, and you want to embed the

Frevvoproduct
in your website, refer to Embedding the Task List for important information.

Once all is configured and running it is possible to test these scenarios:

Signing in from within the network

In this case, the 

Frevvoproduct
 server and the Active Directory server are running on the same network. The user is already authenticated to the windows network and points the browser to:

Code Block
languagehtml/xml
http://[server]/frevvo/web/tn/[LDAP tenant]/login

Substitute LDAP tenant above with the tenant name you configured with the LDAP Security Manager. The server variable should be the ip address of the machine where IIS is installed .

The user will automatically authenticate to 

Frevvoproduct
. It is crucial that the LDAP user is known to 
Frevvoproduct
, in other words, the user should be one of the entries retrieved by the LDAP expression configured in the All Users Filter on the LDAP configuration screen.

Signing in from outside the network

In this case, the 

Frevvoproduct
 server and the Active Directory server are running on different networks. The user is trying to hit the URL below from outside the network. 

Code Block
languagehtml/xml
 http://[server]/frevvo/web/tn/[LDAP tenant]/login 

Substitute LDAP tenant above with the tenant name you configured with the LDAP Security Manager and the server variable with the ip address of the machine where IIS is installed.

Since the user is not authenticated in the windows Network, he will be prompted by the browser for credentials. IIS will authenticate the user in the network and forward the request to 

Frevvoproduct
. The user will be automatically redirected to his initial page without having to re-enter his credentials.

Single sign-on Browser Configuration

If you are still being prompted for Windows authentication after SSO is configured, the security settings for your browser may be too high. Configure your browser to authenticate using the "system logon credentials" (Kerberos authentication mechanism) by adding the frevvo server to the browser's trusted sites.

Follow these steps for the specified browsers:

Configuring Internet Explorer

If you are using either the IisLoginModule or NtlmLoginModule option, your Internet Explorer users may want to modify their browser settings.  By default, Internet Explorer will only allow automatic login for sites in its Intranet zone.  For sites not included in the specified Intranet Zones, a windows dialog box will popup requesting login information.  This popup can be avoided by having your users modify their Intranet Zone settings as described below.

IE will recognize a site as being in its Intranet zone in one of two ways.

1.     The name of the server that you are accessing does not have a dot in the name. For example, http://frevvoserver/.

2.     The site is configured as an Intranet site for IE.

To configure the Intranet sites for IE,

  1. Open IE and select "Tools > Internet Options...".
  2. Select the "Security" tab, click on the "Local intranet" icon, and then click on the "Sites..."
  3. Click the Advanced button. Type the full name of the frevvo server, including protocol, in the first field. For example: http://frevvoserver.com
    1. If you are using SSL, then replace "http" with "https".
  4. Click the "Add" button.
  5. Click the "Close" and "OK" buttons to back out. Now IE should recognize the server as being part of its Intranet zone.
Configuring Firefox

If you are using either the IisLoginModule or NtlmLoginModule option, your Firefox users may want to modify their browser settings.  By default, Internet Explorer Firefox will only allow prevent automatic login for sites in its Intranet zone.  For sites not included in the specified Intranet Zones, .  Browsing the frevvo SSO URL will cause a windows dialog box will to popup requesting login information.  This popup can be avoided by having your users modify their Intranet Zone settings as described below.

IE will recognize a site as being in its Intranet zone in one of two ways.

1.     The name of the server that you are accessing does not have a dot in the name. For example, http://frevvoserver/.

2.     The site is configured as an Intranet site for IE.

To configure the Intranet sites for IE,

...

Firefox settings as described below.

  1. In the Firefox address bar type about:config.  This will display all settings for Firefox.  
  2. In the filter box type ntlm and hit the enter key. This will narrow the display items to those pertaining to NTLM authentication.
  3. Double click on the key entry network.automatic-ntlm-auth.trusted.uris.  This is a comma separated list of trusted servers for which automatic NTLM authentication is enabled.
  4. In the edit box displayed, enter the name of the server you are accessing.  For example, http://frevvoserver.com/.
    1.  If you are using SSL, then replace " http " with " https".
    Click the "Add" button
    1. .
  5. Click the "Close" and "OK" buttons to back out. Now IE should recognize the server as being part of its Intranet zone.
Configuring Firefox

If you are using either the IisLoginModule or NtlmLoginModule option, your Firefox users may want to modify their browser settings.  By default, Firefox will prevent automatic login.  Browsing the frevvo SSO URL will cause a windows dialog box to popup requesting login information.  This popup can be avoided by having your users modify their Firefox settings as described below.

  1. In the Firefox address bar type about:config.  This will display all settings for Firefox.  
  2. In the filter box type ntlm and hit the enter key. This will narrow the display items to those pertaining to NTLM authentication.
  3. Double click on the key entry network.automatic-ntlm-auth.trusted.uris.  This is a comma separated list of trusted servers for which automatic NTLM authentication is enabled.
  4. In the edit box displayed, enter the name of the server you are accessing.  For example, http://frevvoserver.com/.
    1.  If you are using SSL, replace http with https.
  5. Click the OK button.  Firefox should now enable automatic NTLM authentication with the frevvo server.
Configuring Chrome

To configure chrome you need to start the application with following parameter: auth-server-whitelist - <Allowed fully qualified domain name>.

 For example: In Windows,

  1. Click the Start button, All Programs, Accessories, and then click Run
  2. In the Open box, type following and click Ok:
    • chrome --auth-server-whitelist="*frevvoserver.com
Configuring Safari

No additional configuration is needed.

Configure frevvo.internal.baseurl in frevvo.xml for LDAP SSO

This parameter is needed in frevvo.xml for various activities like accessing the ACL page, publishing templates, resetting tasks etc when using LDAP SSO. Let's say you have a browser signed in via SSO to machine m1 (port 80).  IIS is running on m1 (port 80) redirecting /frevvo/web to frevvo running on m2:8082. The browser submits a form to m1, IIS redirects to m2:8082.  The doc action is a frevvo:// URI which gets resolved to http://m1/frevvo/...  

Frevvoproduct
 POSTs to this URI  but m1 rejects the POST since it is not authenticated.

...

Frevvoproduct

...

  1. OK button.  Firefox should now enable automatic NTLM authentication with the frevvo server.
Configuring Chrome

To configure chrome you need to start the application with following parameter: auth-server-whitelist - <Allowed fully qualified domain name>.

 For example: In Windows,

  1. Click the Start button, All Programs, Accessories, and then click Run
  2. In the Open box, type following and click Ok:
    • chrome --auth-server-whitelist="*frevvoserver.com
Configuring Safari

No additional configuration is needed.

Configure URL Properties in frevvo-config.properties for LDAP SSO

Add the frevvo.internal.baseurl and the frevvo.forms.server.external.url properties to the frevvo-config.properties when using LDAP SSO. The frevvo.internal.baseurl property is needed for for various activities like accessing the ACL page, publishing templates, resetting tasks etc. Let's say you have a browser signed in via SSO to machine m1 (port 80).  IIS is running on m1 (port 80) redirecting /frevvo/web to frevvo running on m2:8082. The browser submits a form to m1, IIS redirects to m2:8082.  The doc action is a frevvo:// URI which gets resolved to http://m1/frevvo/...  

Frevvoproduct
 POSTs to this URI  but m1 rejects the POST since it is not authenticated.

To avoid situations such as these, set the frevvo.internal.baseurl to the actual host:port of the 

Frevvoproduct
 server.

If the frevvo.forms.server.external.url  property is set, all share dialogs for forms and flows will use this as the external URL. This may be needed when using frevvo.forms.server.external.url if that external url is not also accessible from the form server machine. Use the syntax shown in the example. change the <myexternalhost>and <port> to your external server name and the port that you are using for 

Frevvoproduct
 on this server.

Follow these steps:

  • edit <frevvo-home>/tomcat/conf/catalina/localhost/frevvo-config.xmlproperties
  • Add the parameter properties shown below with your information: Save the changes to the file.

Code Block
Parameter name="frevvo.internal.baseurl" value="http:// <ip or server name of the m/cmachine where the frevvo server is hosted>:<port>" override="false"/>:<port>
frevvo.forms.server.external.url=http://<myexternalhost>:<port> 

Upload and Video Control Behavior

If your system is configured for LDAP SSO, the upload and video controls exhibit the following behaviors:

  • The "uploading...." snake image displays continuously when uploading an image to an upload control in a form, accessed from a space, on a mobile device.
  • The video control will ask for credentials again in use/design mode if you are using the FireFox browser. In IE9, you will see the message: " The Web-page wants to run the following add-on: 'Windows Media Player' from 'Microsoft Corporation'. What's the risk?" in some browsers. Enter your credentials or run the add-on to proceed.

...

The second problem is in directing tasks to 

Frevvoproduct
users if your LDAP user names are mixed case. One solution is to use hidden controls on your forms with rules to convert the case of user names to lower case. The example below shows two text controls on a form, one visible, EmployeeMixedCase, and the other hidden, Employee.
Image Removed
Image Added

A user types a name (regardless of case) into the EmployeeMixedCase control. The hidden Employee control has a business rule that takes the value of the visible control and converts it to lowercase.

...

Frevvoproduct
to ignore or follow referrals by entering the LDAP property name and value in the table provided on the Add Tenant (on-premise) or Edit Tenant (cloud) screens.

 

 

 

 

 

 

...